Jeep ZJ Adjustable Trackbar Conversion - COR

Fits:  93-98 Grand Cherokee ZJ

Clayton Off Road Mfg. adjustable trackbar and drop bracket give you the strength and adjustability your lifted ZJ needs. When you lift your vehicle over 6 inches your stock trackbar angles become fairly steep. It is very important to keep your trackbar and drag link in parallel and as flat as possible to minimize bump steer and gain steering response. This heavy duty 1/4 inch laser cut trackbar drop bracket lowers the trackbar angles. The bracket bolts into the OEM location for alignment purposes, and should be welded for superior strength over a bolt on design bracket. This bracket not only minimizes trackbar angles, but puts the trackbar bolt in double sheer adding strength. By using the trackbar in double sheer you eliminate any chance of over flexing the joint. A greaseable flex joint is used at the frame end, and a maintenance free high quality Clevite mechanically bonded bushing is pressed into a CNC machined housing on the axle end.

Put it simply, this is the strongest, most adjustable trackbar on the market.

Trackbar comes powdercoated while the bracket is bare metal because it requires welding. A 9/16s grade 8 bolt is included with this kit, while your OEM bolt will need to be reused on the axle side.

Features:

• Heavy duty 1/4 inch laser cut trackbar drop bracket
• Greaseable flex joint is used at the frame end
• Clevite Rubber bushing at the axle end to prevent vibration
• Trackbar is powdercoated
• Hardware and Instructions are included

**Notes:  It is recommended that this bracket be welded on for superior strength!

Product Reviews